¡Optimizations in micro-spaying and a new series of spray nozzles!
Customized spray and blow-out heads for micro-spraying
Even if the technology in the die casting process using micro-spraying has made enormous progress in recent years
to save lubricant and energy and to protect the die, there are still optimizations on a high level.
After a successfull market launch of standard spray and blow-out heads for micro-spraying, the product range
has been extended in recent months to include customized spray and blow-out heads for micro-spraying.
To the already known advantages of micro-spraying such as
- improved part quality
- increase of the mould service life
- reduction of compressed air, lubricant and energy consumption
- reduction of environmental pollution and disposal costs for excess lubricant
could be extended by reducing cycle time.
Customized spray heads allow multiple dies or complex geometric shapes for structural parts to be sprayed
in one position, constant and exactly repeatable. Moving the spray head or oscillating during spraying
is no longer necessary. This results in a significant reduction of the cycle time.
New series of spray nozzles, reduce costs through less air consumption
For conventional spraying for cooling and lubricant, it is also becoming increasingly important
to reduce the consumption of lubricant and especially to reduce the spray air consumption.
The consumption of compressed air in foundries is a high cost factor. The reduction of the compressed air
consumption and the spray air pressure, which must be kept in the supply network,
can be successfully realized with this new series of spray nozzles.
With this new series of spray nozzles 303-RS8xx, lubricant can be sprayed homogeneously over a large area
with significantly reduced air consumption of spray and pressure and this even with a better cooling effect per second.
Heitersheim, 10 de febrero de 2020
GERLIEVA Sprühtechnik GmbH
Teléfono: +49 (0)7634 56912-0